液压阻尼孔的宽温度范围流动特性试验研究

研制一种适合对各种液压孔口或缝隙进行高低温流体力学试验的新型试验装置，运用该装置对具有不同几何参数的液压阻尼孔进行在-50~80℃宽温度范围内的流动特性试验，研究以普通抗磨液压油HM46和低温抗凝减振器油TITAN SAF 5045为工质及其温度变化时对液压阻尼孔流量-压力特性曲线、幂指数和流量系数的影响，研究表明，在低温条件下，液压阻尼孔的流量系数均因油液黏度增大、流动性变差而呈线性下降的趋势，从宏观上看，HM46通过液压阻尼孔时的流动稳定性较差，其对应流量系数的下降幅度明显大于TITAN SAF 5045对应的下降幅度，厚壁小孔流量系数的下降幅度明显大于薄壁小孔对应的下降幅度。研究所获得的新型试验装置、试验数据分析方法和具体理论公式为深入研究和优化现代液压元件在宽温度范围内的动态性能提供新型试验平台与理论基础。     

Adaptive neuro-fuzzy algorithm applied to predict and control multi-phase flow rates through wellhead chokes

A Takagi-Sugeno adaptive neuro-fuzzy inference system (TSFIS) model is developed and applied to a dataset of wellhead flow-test data for the Resalat oil field located offshore southern Iran, the objective is to assist in the prediction and control of multi-phase flow rates of oil and gas through the wellhead chokes. For this purpose, 182 test data points (Appendix 1) related to the Resalat field are evaluated. In order to predict production flow rate (Q_L) expressed as stock-tank barrels per day (STB/D), this dataset includes four selected input variables: upstream pressure (Pwh); wellhead choke sizes (D64); gas to liquid ratio (GLR); and, base solids and water including some water-soluble oil emulsion (BS&W). The test data points evaluated include a wide range of oil flow rate conditions and values for the four input variables recorded. The TSFIS algorithm applied involves five data processing steps: a) pre-processing, b) fuzzification, c) rules base and adaptive neuro-fuzzy inference engine, d) defuzzification, and e) post-processing of the fuzzy model. The developed TSFIS model for the Resalat oil field database predicted oil flow rate to a high degree of accuracy (root mean square error = 247 STB/D, correlation coefficient = 0.9987), which improves substantially on the commonly used empirical algorithms used for such predictions. TSFIS can potentially be applied in wellhead choke fuzzy controllers to stabilize flow in specific wells based on real-time input data records.     

油介质下高速轮轨低黏着特性和撒砂试验研究

在车轮-钢轨高速滚动接触疲劳试验机上进行油介质下高速轮轨低黏着特性和增黏试验,研究油介质条件下不同速度、蠕滑率、轴质量以及撒砂对黏着系数的影响,最高试验线速度200 km/h。结果表明:黏着系数随蠕滑率的增加先增大、再微降随后趋于平稳,在蠕滑率3%左右达到最大;随着速度的增加,黏着系数呈快速下降趋势,如速度从50 km/h增加至200 km/h时,最大黏着系数从0.092下降至0.049;当轴质量由12 t增至16 t时,黏着系数仅略微增加了0.01;撒砂后,黏着系数约为未撒砂时的3倍左右,且依然随速度增加而降低;撒砂会使得试验后轮轨表面产生很多麻坑,从而增大了表面粗糙度,对增黏起到了一定作用,但增黏砂会对接触表面造成显著损伤,在极端条件下会促进滚动接触疲劳的萌生,威胁运行安全。     

HACCP在浓香菜籽油生产中的应用

为了保障浓香菜籽油的产品质量安全,采用HACCP体系对浓香菜籽油生产全过程进行生物、物理、化学的危害分析,确定关键控制点,制定预防措施,并对生产环节进行有效监控,制定纠偏措施,做好记录管理,为浓香菜籽油的安全生产提供借鉴。     

Effects of phenylenediamines and alkoxysilanes on gas transport properties of polyimide - silica hybrid membranes

Gas transport properties of polyimides (PIs) and their silica hybrids were investigated. The PIs synthesized with several methyl-substituted phenylenediamines were hybridized with silica via a sol–gel process with different alkoxysilanes. The prepared hybrid membranes showed controlled gas permselectivity, depending on the selected phenylenediamines and alkoxysilanes. It was worth noting that the hybrids prepared with tetraethoxysilane possessed improved CO₂ permselectivity with increasing silica content, which tended to exceed the upper-bound trade-off line. This fact suggested the additional formation of free volume holes especially favorable for the CO₂/CH₄ separation around the polymer/silica interfacial area.     

Study on migration characteristics of heavy metals during oil sludge incineration

Experimental and simulation studies on the migration characteristics of heavy metals during the incineration of OS were conducted with a tube furnace reactor and thermodynamic equilibrium calculation software FactSage, respectively. The results showed that when the incineration temperature increased from 800°C to 1100°C, the release rates of heavy metals such as Cr, Pb, Cu, Zn and Ni increased gradually and reached the maximum at 1000°C. When the excess air ratio increased from 1.0 to 1.4, the release rates of heavy metals such as Cr, Pb, Cu, Zn and Ni first decreased and then became steady. The content of gaseous hydroxide of Cr and gaseous chlorides of Pb and Cu increased while the chemical forms of Zn and Ni did not change obviously with the increase of combustion temperature or excess air ratio.     

不同产地及成熟度牛油果及其油脂品质比较

分析不同产地及成熟度牛油果及其油脂理化性质,脂肪酸组成及反式脂肪酸组成。结果表明:牛油果作为水果,粗脂肪含量和粗蛋白质含量很高;不同产地及成熟度牛油果溶剂提取所得油脂理化性质和脂肪酸组成有一定的差异。研究可为进一步开发牛油果油和制定牛油果油标准提供参考。     

山西野生木本油脂植物资源现状分析

为掌握山西省野生木本油脂植物资源现状,采用实地踏查、试验分析和资料收集相结合的方法,对山西省内主要山地、自然保护区不同野生木本油脂植物资源的种类、分布及含油率进行全面调查统计,并用索氏提取法测定33种木本油脂植物的含油率。结果表明:山西省野生木本油脂植物共43科84属168种。目前开发利用较多的种类有翅果油树、中国沙棘、文冠果等,具有较大开发潜力的有榛属、朴属、山胡椒属、盐肤木属、卫矛属、南蛇藤属、梾木属、槭属、栾树属、野茉莉属、连翘属等。对山西省野生油脂植物的种类组成、取用部位、用途以及利用现状进行了分析,并提出保护与利用建议。